Color match duplicolor2/8/2024 Before applying paint be sure to remove sanding dust from the surface with a dry cloth. Sanding is important to ensure good mechanical adhesion of paint to the surface. (2) Wax and Grease Remover to remove solvent soluble contaminants like Grease and oil, Road Tar, Wax and Polishes, and Silicone (1) Hot water and soap to remove water-soluble contaminants like Dirt, Mud, Tree Sap, Bird Droppings, and Road Salt We recommend two different cleaning methods to remove two different types of contaminants: Then follow by cleaning the surface with a wax and grease remover. Once all loose paint, rust and debris have been removed, we recommend the surface be cleaned with a mixture of mild detergent and water, rinsed and dried. When painting, a clean, well-sanded surface is key to a successful finish. Lacquers do not have a “re-coat window.” Subsequent coats of Lacquer can be applied over a Lacquer finish without wrinkling or lifting due to a “re-coat window”. The paint may wrinkle or lift when resprayed during this curing period. After spraying the first coat of an enamel, a second coat must be applied with in 1 – 2 hours or wait 5 days for the coating to cure. Re-coat windows apply to enamel paints and refers to the time period during which a second coat maybe applied. Test carefully in an inconspicuous area before proceeding. Lacquers will work over most fully cured enamels that have good film integrity. Lacquers have a tendency to lift enamel surfaces. Dupli-Color® enamels can be sprayed over lacquer substrates, or any other painted surface that has been sanded smooth and clean of dirt, grease, and dust. Generally, enamels are very durable, high gloss coatings. This new film will not re-dissolve in its original solvent. The two families of paint are lacquers and enamels.Įnamels dry or cured through oxidation and polymerization, which is the combining of individual molecules to form larger molecules. Generally, Lacquer topcoats are easy to use, fast drying, high gloss, durable, and easy to buff. The dried film will re-dissolve in its original solvent for an indefinite period of time no chemical reaction occurs to alter the properties of the film. Lacquer materials dry entirely by the evaporation of their solvent. When applying Truckbed Coating, how much sanding is required? Will it hold up to the engine temperatures?ĭo I have to use the METALCAST™ Ground Coat on chrome or bare-metal Surfaces? I want to paint my chrome valve covers with METALCAST™. When I spray the METALCAST™ do I need to apply the Adhesion Promoter? I want to paint my motorcycle tank with MIRAGE®, will the paint be resistant to gasoline? How many coats of MIRAGE® do you recommend to achieve good color change? What should I do if the paint tip becomes clogged?ĭo I need to apply the black base before applying the MIRAGE® Mid-Coat Color? Why do you offer 4 different color primers? Should I always protect surrounding areas from overspray? Why do you recommend cleaning with a water and mild detergent mixture then a Wax and Grease Remover?
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |